News
Key points of replacement of auto parts
Release time:
2023-09-08 11:03
1. as far as possible the use of sealant, when needed, can be used instead of paint to achieve the ideal sealing effect;
The appearance quality of 2. rubber seals shall be carefully checked before assembly; special tools shall be used for press fitting to avoid knocking and deformation;
3. fill lubricating grease according to regulations, and regularly clean and dredge the vent hole and check valve;
The 4. is assembled under extremely clean conditions, and the working surface of the parts is free of bumps, scratches, burrs and other attachments;
5. strict operating procedures, seals should be installed correctly to prevent deformation in place;
6. master the performance specifications and use requirements of seals, and replace the failed parts in time;
7., for thin-walled parts such as side covers, sheet metal shall be used for cold correction. The shaft hole parts that are easy to wear can be made of metal spraying, welding repair, gluing, machining and other processes to reach the original factory size;
If the 8. nut is broken or loose, trim or replace it with a new one, and screw it to the specified torque.
Nantong Dongyang Precision Parts Co., Ltd.
Address: No.58, Zhuhai Road, Binjiang Street, Haimen District, Nantong City
Contact: Mr. Huang
Mobile: 0086-13862888166
Mailbox: think_sh@163.com
Scan Access Mobile Edition
Copyright©2023 Nantong Dongyang Precision Parts Co., Ltd.